Definition and structural characteristics
Wear-resistant layer aluminium oxide or melamine coating, thickness 0.15-0.6mm, multi layer Laminate wood Flooring's wear-resistant rpm ≥ 6000 rpm.Wear-resistant layer.
01
Decorative layer diamine resin impregnated paper, patterns including imitation wood, imitation stone, abstract design, etc..
02
Substrate layer
HDF density ≥ 0.85g/cm³, some high-end products use locking substrate to enhance the stability of splicing.
03
Balance layer
phenolic resin impregnated paper, moisture-proof performance is better than ordinary kraft paper.
04
Material and production process
Substrate
HDF or chipboard, need to pass formaldehyde emission (≤0.124mg/m³) and static flexural strength test.
Process
four-layer material one-time hot pressing moulding, reducing the use of glue and enhancing environmental protection.
Performance Advantages
Multi layer Laminate wood Flooring is domestic grade abrasion resistance ≥ 6000 rpm, commercial grade ≥ 9000 rpm.
balanced layer of moisture-proofing.
The balanced layer of moisture-proof paper can withstand 72 hours of water immersion test.
Comply with CARB P2, F★★★★ and other international standards.
Eco-Friendly: Comply with CARB P2, F and other international standards.
Locking design can achieve seamless splicing without professional tools.
Application Scenarios
High humidity areas
kitchens, basements (with waterproof mats).
Public places
shopping malls, gyms, due to the strong impact resistance (can bear 500kg/m²).
Installation requirements
Locking installation: precise matching of tongue and groove, vertical displacement control ≤ 0.1mm.
The floor pretreatment: humidity ≤0.1mm.
Ground pretreatment: humidity ≤ 12%, temperature difference ≤ 5℃/24 hours.
Hot Tags: multi layer laminate wood flooring, China multi layer laminate wood flooring manufacturers, suppliers, factory, Multilayer Press Laminate Wood Flooring, Multi Layer Laminate Wood Flooring, laminate wood flooring
